Metallic Texture, Electroplating Treatment,Fashion Plating Tile
Product Description:
| Product name | Fashion Plating Tile |
| Tile Type | Marble Tiles |
| Material | marble |
| Size | CHIPSIZE: 50*300mm |
| Thickness(MM) | 10mm |
| Water Absorption | 0.5% |
| Color | color available |
| Usage | decrative materials |
| Surface Treatment | glossy |
| Function | Acid-resistant, Antibacterial, Non-Slip, Wear-Resistant |
| Packaging | Inner packing: plastic sheet, carton Outer packing: seaworthy wooden crate |
| Delivery Time | 5-10days after the deposit is paid. |
| MOQ | 20 square meters |
| Supply Ability | 10000 square meters per day |
| Remark | All kind of designs can be produced according to your requirements. The production of custom patterns is supported. |
Just the right amount of accents
tone of the whole space
With the heart of a craftsman, the beauty of the world
Tiling method
Tile adhesive / structural adhesive can be used
You can use cross card locator when tiling
Easier to neatly align the seams
Small tiles recommended to leave 2-3mm paving
Large tiles recommended 3-5mm
Construction steps:
1. Grouting agent mixing: medium-in-one two-in-one adhesive caulking agent to water, the ratio of water topowder is 1:4, stir until no powder, the slurry is guaranteed to be used within 2 hours (Note: Do not soak thewater before the mosaic is laid )
2. Flatten the base surface: the paving base surface should be clean and flat, then use the paving serratedknife to smooth the adhesive to the wall; the construction environment temperature is guaranteed between 5and 39 degrees Celsius.
3. Preparation for paving: use a serrated knife to scrape the wavy stripes on the patch plane.
4. Paving: When laying the mosaic, use the balanced balance ruler to put a mosaic on the reference surfaceto ensure the balance between each mosaic.
5. Plaster reinforcement: After the mosaic is laid, gently press the surface with a caulking sponge. Let thesurface level and mix evenly to ensure complete stability.
6. Preparation of caulk: stir the caulk.
7. Caulking: Fill the mosaic seam carefully with a sponge knife. The mosaic seam is not filled with dust andit is inconvenient for future cleaning. (Note: a soft tool must be used. The final coagulation strength at theseam is 28 days. During the period, try to avoid soiling).
8. Cleaning: Prepare a clean rag. After the filling is completed, the surface can be cleaned after 1 hour.Daily cleaning can be done directly with a wet towel.
-
-
Product Tags:
|
|
10mm Ultra Thin Stone Panels Wall Metallic Texture Electroplating Treatment Fashion Plating Silver Images
|
